Tyco Electronics M/A-COM MM23016 ユーザーズマニュアル

19 

The buttons on the front panel are backlit for operation in a low ambient light level such as nighttime 
operation. Some buttons also flash to provide feedback of various operating conditions. 

In addition, the front panel contains a light-level sensor that samples ambient light levels for automatic 
display and button backlight brightness adjustments. In other words, it automatically brightens the display 
and backlights when higher external light levels exist and it automatically dims the display and backlights 
during lower external light levels. 

Power On-
Off/Volume Control 
Knob 

Turn knob clockwise to power on the radio and increase volume. 

Turn counter-clockwise to decrease volume and power off the radio. 

Mic Connection 

Connection for hand-held, hands-free, speaker-mic, or headset. 

 

If enabled through programming, the emergency button sends an emergency alert and opens 
voice communication on the currently selected talk group or the default emergency talk group 
(depending upon how the system is defined). 

Ambient Light 
Sensor 

Radio automatically adjusts the display and button backlight brightness level based on 
ambient light. Do not block this sensor. 

 

 or 

 

While in the dwell display, scrolls through available talk groups. 

Scrolls through selections within the active menu (available talk groups, pre-programmed 
speed dial numbers, canned alert messages, etc.). 

 

OPT/OPTION 

CLR/CLEAR 

Scrolls through available menu items. 

MENU 

Press to activate the current selection. In some cases, this is not necessary as the last 
selection will automatically activate after a short period. 

Display Area 

Menu selections and messages. 

Network Connectivity icon. 

Current Volume Level icon. 

Volume represented numerically within the display (0 = Muted, 40 = Loudest). 

User may select which one of several dwell displays the radio uses. 

Pre-Set Buttons 

A, B, & C 

These buttons are used to store and recall user-selectable parameters such as scan mode, 
selected profile, selected talk group, and priority talk group. Different parameters can be 
stored at each of the three different pre-set buttons. 

Preset button C can be configured via programming to reboot the radio into a particular 
application mode. Contact your system administrator to determine if this feature is enabled in 
your radio. 

Not functional in OpenSky systems. 

1.  Rotate the Power On-Off/Volume Control knob clockwise to power on the radio. The display will 

illuminate when the radio powers up.