Pelco Stereo Equalizer cm9760-gui ユーザーズマニュアル

Chapter Three: Maps and Administrator Features

12/97

9760-GUI

23

1. Log on to the system using the Administrator password.

2. If the camera/mimic buttons on the map currently displayed need to be programmed, go to Step

4. If camera/mimic buttons on another map need to be programmed, go to Step 3.

3. To load another map, complete Steps 3 to 6 from Loading Files.

4. Ensure Show Buttons command from the Screen menu option has been selected (i.e., a check-

mark appears next to the option). All buttons will be displayed with their physically allocated
number.

5. Select Cam/Mimic Button Setup from the Map menu option. The Cam Button Setup window

(illustrated in Figure 3-9) will appear.

6. Press  <<  or  >>  until the required button appears in the Current Cam/Mimic box.

7. If this button is required to select a camera or change the state of a camera auxiliary, go to step

8. If not, go to Step 9.

8. To select a camera or change the state of a camera auxiliary with this button:

a)  Select the Cam column. Enter the logical number of the required camera using the
numeric keys on the keyboard.

b)  If the camera needs to be moved to a preset position, select the Pre column and enter
the required preset position number.

c)  If an auxiliary needs to be operated, select the Aux column and enter the auxiliary
number required. This option changes the state of the auxiliary entered (e.g., turns it ON
if it is OFF, turns it OFF if it is ON)

9.   To program more buttons, repeat Steps 6 to 9.

10.  When programming of all camera/mimic buttons is complete, click Done.

11.  When complete, save changes (refer to Saving Files).

Current
Cam/Mimic Box

“ A u t o   S h o w ”
Click this box if individual
buttons are always to be
displayed on maps