TROY Group EtherWind 802.11b ユーザーズマニュアル
DEC LAT Network
Configuration
Note:
Only TROY EtherWind-N models include DEC LAT support.
Only TROY EtherWind-N models include DEC LAT support.
The EtherWind wireless print server acts as a node on an Ethernet network that
offers printing services to other devices. The print server comes preconfigured to
run on a LAT network and does not require any additional setup.
offers printing services to other devices. The print server comes preconfigured to
run on a LAT network and does not require any additional setup.
Each print server has a default node name of XCD_xxxxxx (where "xxxxxx" are the
last six digits of the Ethernet address of the unit). The port name is P1 for the
EIO, MIO, or first parallel port; S1 for the first serial port, P2 for the second par-
allel port, and S2 for the second serial port.
last six digits of the Ethernet address of the unit). The port name is P1 for the
EIO, MIO, or first parallel port; S1 for the first serial port, P2 for the second par-
allel port, and S2 for the second serial port.
VMS LAT Host Configuration
Use the VMS editor to create a text file with the necessary configuration commands
to create a LAT application port and then a VMS print queue. For example:
to create a LAT application port and then a VMS print queue. For example:
$MCR LATCP
CREATE PORT LTA
CREATE PORT LTA
xx:/APPLICATION
SET PORT LTA
xx:/NODE=nodename/PORT=port
SHOW PORT LTA
xx:
EXIT
$SET TERM LTA
$SET TERM LTA
xx:/PASSTHRU/PASSALL/-
TAB/NOBROADCAST/PERM
$SET DEVICE/SPOOL LTA
$SET DEVICE/SPOOL LTA
xx:
$INIT/QUEUE/START/ON=LTA
xx:/-
PROC=LATSYM
queuename
Note:
LTA
LTA
xx is the available LAT port to be used
nodename is the node name of the print server
port is the port, e.g. P1, S1, P2, S2 & LN
queuename is any unique name for the print queue.
port is the port, e.g. P1, S1, P2, S2 & LN
queuename is any unique name for the print queue.
8-1
8