Troy-Bilt 24A-070F766 ユーザーズマニュアル

5

 This unit is shipped without gasoline or oil 

in the engine. Be certain to service engine with gasoline 
and oil as instructed in the separate engine manual 
before operating your machine.

NOTE: Reference to right or left hand side of the Yard
Vacuum is observed from the operating position.

This Yard Vacuum has been completely assembled at 
the factory, except for the handle, bag, and blower 
chute. These parts are shipped loose in the carton. A 
pair of safety glasses, a bottle of engine oil, and the 
operator’s manual are also included in the carton. See 
Figure 1. 

•

Cut each corner of the carton vertically from top to 
bottom. 

•

Remove all loose parts.

•

Remove loose packing material.

•

Lift unit from the rear to detach it from underlying 
carton material and roll unit out of carton.

•

Check carton thoroughly for any other loose parts.

NOTE: Make sure not to crimp cables while removing
loose parts or the entire unit from the carton.

•

Handle Assembly

•

Bag

•

Blower Chute

•

Hose  Assembly

•

Safety Glasses

•

A Bottle of Engine Oil (may be located in bag)

•

Operator’s Manual

Before proceeding with assembly of your new Yard 
Vacuum, disconnect the spark plug wire from the 
spark plug and ground onto the retaining post on the 
engine. This will prevent accidental starting of the 
engine. See Figure 2.