Tripp Lite SNMP Solo MT-SE-37/02 ユーザーズマニュアル
Tripp Lite
System Requirements
7
System Requirements
SNMP Solo requires a terminal for configuration and a network
connection with an NMS for operation. The following is a
description of all required components and a list of the most
widely used NMSs.
• The components of your standard SNMP Solo package
connection with an NMS for operation. The following is a
description of all required components and a list of the most
widely used NMSs.
• The components of your standard SNMP Solo package
• Connection to an EtherNet network
• An SNMP-based management station
Some NMSs that support the SNMP Solo are:
HP OpenView for UNIX
HP OpenView for Microsoft Windows
Novell NMS
SunConnect SunNet Manager
IBM NetView/6000
HP OpenView for Microsoft Windows
Novell NMS
SunConnect SunNet Manager
IBM NetView/6000
• A dumb terminal or a PC with an emulation package to
configure the SNMP Solo SNMP Agent
• An RS232 communication port on your PC or terminal
• A UPS—any UPS type
You can interface any contact closure UPS with SNMP Solo
if you have the manufacture’s specific cable supplied with
your kit.
if you have the manufacture’s specific cable supplied with
your kit.
• Network identification values for the SNMP Solo:
IP Address
Net Mask
IP Addresses for the NMS
Definitions of Communities
IP Address of the Gateway/Router
Net Mask
IP Addresses for the NMS
Definitions of Communities
IP Address of the Gateway/Router