Tripp Lite SNMP Solo MT-SE-37/02 ユーザーズマニュアル
SNMP Solo
12
Configuration
Set IP And Gateway Addresses
And MIB System Group
And MIB System Group
To set the IP address, Gateway address, MIB system group,
and other system configurations, type 1 at the prompt. The
following screen displays:
and other system configurations, type 1 at the prompt. The
following screen displays:
Figure 6 IP Address for the SNMP Solo and More
NOTE:
The minimum requirement to operate SNMP Solo is to set
the IP address.
the IP address.
To enter values, enter the number of the option, type a
<space>, and enter the name. Press <enter>. Your new value
displays next to the field heading on the top of the screen.
<space>, and enter the name. Press <enter>. Your new value
displays next to the field heading on the top of the screen.
If you want to return to the Main Menu, press 0 (zero) and press
<enter>.
<enter>.
For more information on IP addresses and net masks, see the
Reference section of the Appendix in this manual.
Reference section of the Appendix in this manual.