Patton electronic IP Phone SmartNode 4110 Series ユーザーズマニュアル

Call router configuration task list

SmartWare Software Configuration Guide 

Besides the header (name, input and output-type) a mapping table contains multiple entries. Each entry speci-
fies a specific value of the routing table input-type and a value that shall be applied to the call property specified 
with the output-type of the table. When a call arrives a mapping table, the following procedure is applied:

1. Examine the call property as specified with the mapping table input-type.

2. Select the best matching entry. This means that the key of each of the entries is compared to the call prop-

erty and the entry that matches best is chosen.

3. Execute the entry. This means replacing the property specified with the output-type of the mapping table 

with the value of the selected entry.

called-name

Selects an entry based on the display name 
of the called party.

Sets the display name of the called 
party.

calling-name

Selects an entry based on the display name 
of the calling party.

Sets the display name of the calling 
party.

name

If the output-type is also a generic kind of 
property, this mapping table is applied to 
both, this calling-name and the called-
name.

If the input-type is also a generic kind of 
property, this mapping table is applied 
to both, the calling-name and the called-
name property.

called-ip

Selects an entry based on the remote sig-
naling IP address of the destination VoIP 
peer.

Sets the remote IP address of the destina-
tion VoIP peer.

calling-ip

Selects an entry based on the remote sig-
naling IP address of the origination VoIP 
peer.

Sets the remote IP address of the origina-
tion VoIP peer.

ip

If the output-type is also a generic kind of 
property, this mapping table is applied to 
both, this calling-ip and the called-ip.

If the input-type is also a generic kind of 
property, this mapping table is applied 
to both, the calling-ip and the called-ip 
property.

calling-pi

Selects an entry based on the presentation 
indicator.

Sets the presentation indicator.

calling-si

Selects an entry based on the screening 
indicator.

Sets the screening indicator.

itc

Selects an entry based on the information 
transfer capability (bearer capability) to 
distinguish speech from data calls.

Sets the information transfer capability.

time

Route calls based on the current time of 
day.

Cannot be set.

date

Route calls based on the current date.

Cannot be set.

day-of-week

Route calls based on the current day of 
week.

Cannot be set.

Table 20. Mapping table types (Continued)