Panasonic DMR-EZ485VK 操作ガイド

40

You can enjoy linked operations with the TV and receiver by using “HDAVI Control”.

Preparation
1. Connect this unit to your TV or receiver with an HDMI cable (

 11, 72).

2. Set “VIERA Link” to “On” (

 66). (The default setting is “On”.)

3. Set the “HDAVI Control” operations on the connected equipment (e.g., TV).

 When using HDMI2 terminal of VIERA as “HDAVI Control”, set the input channel to HDMI2 on VIERA.

4.  Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so 

that the “HDAVI Control” function works properly.

1

  This button is available only when this unit is on.

2

   When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents 

from where playback started.
In this case, press [

] or [] to go back to where playback started.

3

  Depending on discs, the TV may not automatically turn on.

(When the TV is on)

Automatic input 
switching

When the TV is on and the following operations are performed, the TV’s input will 
automatically switch to HDMI input mode and the TV displays the corresponding 
action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [FUNCTIONS]

1

PLAY]

2

 If you operate the VHS when the unit is recording on the DVD drive, the output does not automatically 

switch.

(When the TV is off)

Power on link

When the TV is off and the following operations are performed, the TV will 
automatically turn on and display the corresponding action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [

PLAY]

2



 

 

[DVD-V]

3

, etc.

The TV is automatically turned on when you insert a disc or a tape without the accidental erasure 
prevention tab.

 If you operate the VHS when the unit is recording on the DVD drive, the TV does not automatically turn on.

Power off link

When you turn the TV off, this unit is also automatically turned off. This unit 
automatically turns off even if the FUNCTIONS screen, the status message or the
on-screen menu is displayed during playback.
Even if the TV is turned off, this unit will not turn off at the same time under the 
following conditions:

– when you press [

 REC] and this unit is recording

– when scheduled recording is proceeding
– when copying
– when fi nalizing, etc.
 When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable, the 

receiver will also turn off.

VIERA Link

TM

 is a new name for EZ Sync

TM

.

VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV 
(VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI 
cable. See the operating instructions for connected equipment for operational details.


 

 VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard 

known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. 
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.

  This unit supports “HDAVI Control 3” function.

 “HDAVI Control 3” is the newest standard (current as of December, 2007) for Panasonic’s HDAVI Control 
compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.

 Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. 

 Notes

  When this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 3 and initially set up, it automatically acquires the TV 

setting information.

  These functions may not work normally depending on the equipment condition.
  About “HDAVI Control” function, read the operating instructions of the connected equipment (e.g., TV) too.

DMR-EZ48VP.indb   40

DMR-EZ48VP.indb   40

2007/12/13   20:43:16

2007/12/13   20:43:16