Toro EC-XTRA Landscape Timer, 6-Zone (53794) インストールガイド

 

Turn the control dial to the 

position. 

  Check the 

 switch setting. If necessary, 

reposition the switch to select the desired program.

  Program start time number 1 will begin flashing. The 

current program start time or OFF will be displayed 

for start time number 1. To select a different program 

start time number, press the +/

 or the –/

 button 

until the desired number is flashing.

The numbers (1–4) shown at the top of the dis-

play designate program start times and should not be 

confused with zone numbers. The zone numbers will be 

shown at the bottom of the display when setting zone run 

time.

  Press the 

 button. The hour digit(s) or OFF will 

begin flashing.

 To remove the start time, select OFF by 

pressing the +/

 and –/

 buttons at the same 

, and continue at step .

  To set the hour (and 

am

/

pm

), press the +/

 or the 

 button until the desired hour is flashing.

  Press the 

 button. The minute digits will begin 

flashing.

  To set the minutes, press the +/

 or –/

 button 

until the desired minute is flashing.

  Press the 

 button. The next program start time 

number will begin flashing.

  To select another start time number, press the +/

 

or the –/

 button until the desired start time num-

ber is flashing. 

 To set, change or remove a program start time for 

the start time number selected, repeat all of the 

steps starting at step  .

 

 To set program start times for another program, 

repeat all of the steps starting at step  .

  Return the control dial to the 

position.