Toro EC-XTRA Landscape Timer, 6-Zone (53794) インストールガイド

The ECXTRA timer has three modes of operation: Auto-

matic, Manual and Off. In the Automatic mode the timer 

tracks the time and day and operates the automatic 

watering schedules. The Manual mode enables the 

zones and watering programs to be started and con-

trolled manually at any time. The Off mode shuts off all 

watering activity and prevents any zones from operating 

automatically or manually.
The Rain Delay and Season Adjust control features are 

provided to enable quick, temporary changes in operation 

to help compensate for variables in weather and season.
Each of the operating modes and control features are 

explained in this section of the guide and can be found 

on the following pages:
•  Automatic Operation, page 30 

•  Manual Operation, page 31 

•  Watering Control Features, page 32 

•  Using the Rain Delay Feature, page 33

•  Using the Season Adjust Feature, page 34

•  Turning Off The EXCTRA, page 35

In the Automatic mode, the ECXTRA keeps track of the 

current time, day of the week and the automatic watering 

program schedule. Automatic operation will occur when-

ever a programmed watering day and start time match 

the current time and day. 

The Automatic mode is selected when the control dial is 

in the 

position. While in the automatic mode, the 

display will show two types of information: Status and 

Operating.
This example shows the Status 

display. The current time is 

2:45 

pm

 and the current day is 

Monday. Programs A and B are 

scheduled to operate today. 
When watering starts, the Operating display appears and 

is shown with the Watering On symbol. In this example, 

program A is operating. Zone 1 has 10 minutes of run 

time remaining. Zones 2 and 3 

will also run during this water-

ing cycle. This program also 

has a season adjust factor, so 

the Percent symbol will also 

be displayed.
Note: 

If the control dial remains in any other position 

(except 

) for more than 8 minutes, the timer will revert 

to the Automatic mode. 
Note:

 The position of the 

switch does not 

determine which program will run during automatic timer 

operation. In other words, if a program has an assigned 

watering day schedule, start time and an assigned zone 

with run time, it will operate automatically regardless of 

the 

switch position.