Toro EC-XTRA Landscape Timer, 6-Zone (53794) インストールガイド

Once programmed, the ECXTRA memory will be 

retained for several years with or without power. Only  

the current time and date information will be lost and will 

need to be reset if power is disconnected for more than 

24 hours. 

The programmable memory can be cleared and reset to 

the default settings of individual programs or all pro-

 simultaneously. (Refer the the default settings 

listed on page 21.)
IMPORTANT:

 This procedure permanently erases the pro-

grammable watering information and can not be automati-

cally restored once the procedure has been completed.
To clear the memory of a selected program 

(Example 1):

  Turn the control dial to the 

position.

  Check the 

 switch setting. If necessary, 

reposition the switch to select the desired program.

  Press the 

 button to access the clear memory 

feature; CL will be displayed and begin flashing.

  Press and hold the –/

 button until CL stops  

flashing (approximately five seconds). The memory 

will be cleared to the default settings. 

 To clear the memory of another program, repeat all 

of the steps starting at step .

  Return the control dial to the 

position. 

(Example 2):

  Turn the control dial to the 

position.

  Press the 

 button to access the clear memory 

feature; CL will be displayed and begin flashing.

  Press and hold the –/

 button until CL stops  

flashing (approximately five seconds). The memory 

will be cleared to the default settings. 

  Return the control dial to the 

position. 

Example 1

Example 2