Toshiba VF-AS1 ユーザーズマニュアル

E6581301!

H-3

(Continued)

Commun

ication

No.

Item displayed

Key

operated

LED

display

Description

FE08

CPU1 version

X The version of the CPU1 is displayed.

FE73

CPU2 version

Y The version of the CPU2 is displayed.

FE10

Past trip 1

⇔

Past trip 1 (displayed alternately at 0.5-sec. intervals)

FE11

Past trip 2

J! ⇔

Past trip 2 (displayed alternately at 0.5-sec. intervals)

FE12

Past trip 3

⇔

Past trip 3 (displayed alternately at 0.5-sec. intervals)

FE13

Past trip 4

PGTT

⇔ Past trip 4 (displayed alternately at 0.5-sec. intervals)

FE79

Part replacement

alarm information

O___

The ON/OFF status of each of the cooling fan, circuit

board capacitor, main circuit capacitor or part

replacement alarm of cumulative operation time is

displayed in bits.

ON:

OFF:_

FE14

Cumulative

operation time

The cumulative operation time is displayed.

(Indication of 0.1 represents 10 hours.)

Default display

mode

[Note 1]

The operation frequency is displayed (during operation).

Note 1: Press the

keys to change items displayed in the status monitor mode.

Note 2: Contents of status indications of *1, *2, *3, *4, *5, *6, *7, *8, and *9 can be selected from 44 kinds of

information.

Contents of status indications that are set up at H (standard monitor display selection) and

H~H (status monitor 1 to 8 display selection) are displayed.

Unit of current and voltage indications can be changed from % to A (ampere)/V (volt) and vice versa

respectively. Refer to Section 5.15.

Note 3: Indicated input voltage is DC voltage just after input voltage is rectified multiplied by 1

2 .

Note 4: The number of bars displayed varies depending on the setting of H (logic output/pulse train output

selection.)

The bar representing the OUT1 terminal is displayed only when logic output function is assigned to it.

If H=: The bar representing OUT1 is displayed.

If H=: The bar representing OUT1 is not displayed.

Note 5: Past rip records are displayed in the following sequence: 1 (latest trip record)

⇔2⇔3⇔4 (oldest trip record).

If there is no trip record, PGTT is displayed.

Details on past trip record 1, 2, 3 or 4 can be displayed by pressing the ENT key when past trip 1, 2, 3 or

4 is displayed. For more details, refer to Section 8.2.2.

Note 6: The part replacement alarm is displayed based on the value calculated from the annual average ambient

temperature, operation time and load current specified using H.

Use this alarm as a guide only, since it is based on a rough estimation.

Note 7: The cumulative operation time increments only when the machine is in operation.

MODE

O___K

Cooling fan

Cumulative

operation time

Control circuit board
capacitor

Main circuit capacitor

[Note 6]

[Note 7]

[Note 5]