Toshiba VF-AS1 ユーザーズマニュアル

E6581301

H-12

(Continued)

Commun

ication

No.

Item displayed

Key

operated

LED

display

Description

FE10

Past trip 1

⇔ Past trip 1 (displayed alternately at 0.5-sec. intervals)

FE11

Past trip 2

J! ⇔ Past trip 2 (displayed alternately at 0.5-sec. intervals)

FE12

Past trip 3

⇔ Past trip 3 (displayed alternately at 0.5-sec. intervals)

FE13

Past trip 4

PGTT

⇔ Past trip 4 (displayed alternately at 0.5-sec. intervals)

FE79

Part replacement

alarm information

O___K

The ON/OFF status of each of the cooling fan, circuit

board capacitor, main circuit capacitor or part

replacement alarm of cumulative operation time is

displayed in bits.

ON:

OFF: _

FE14

Cumulative operation

time

The cumulative operation time is displayed.

(Indication of 0.1 represents 10 hours.)

Default display mode

! ! ! !

! ! ×2

Status monitor mode (The code blinks if a trip occurs.)

Reverts to the first trip indication.

Note 1: If trouble occurs while the CPU is being initialized after the inverter is turned on or reset, the trip record

retaining function does not record it but displays a status monitor item.

Note 2: Contents of status indications of *1, *2, *3, *4, *5, *6, *7, and *8 can be selected from 44 kinds of information.

Contents of status indications that are set up at H~H (status monitor 1 to 8 display mode) are

displayed.

Note 3: Items displayed when a trip occurs can be changed by pressing or key.

Note 4: You can switch between % and A (ampere)/V (volt), using the parameter FURW (current/voltage unit

selection).

Note 5: The input voltage displayed is 1/

2 times as large as the rectified DC input voltage.

Note 6: The number of bars displayed varies depending on the setting of H (logic output/pulse train output

selection). The bar representing the OUT-NO terminal is displayed only when logic output function is assigned

to it.

If H=:The bar representing OUT-NO is displayed.

If H=:The bar representing OUT-NO is not displayed.

Note 7: Past rip records are displayed in the following sequence: 1 (latest trip record)

⇔2⇔3⇔4 (oldest trip record).

If there is no trip record, PGTT is displayed.

Details on past trip record 1, 2, 3 or 4 can be displayed by pressing the key when past trip 1, 2, 3 or 4

is displayed. For more details, refer to Section 8.2.2.

Note 8: The time elapsed before an end of part replacement alarm is issued is calculated from the average yearly

ambient temperature, operation time and load current entered using H, and it is no more than an

estimation, and therefore it should be used for reference purposes only.

Note 9: The cumulative operation time increments only when the machine is in operation.

Note 10: At the occurrence of a trip, maximum values are not always recorded and displayed for reasons of detecting

time.

ENT

[Note 7]

O___K

Cooling fan

Cumulative

operation time

Control circuit board
capacitor

Main circuit capacitor

MODE

[Note 9]

[Note 7]

[Note 8]