TM Performance Marine Radio Release 2.0 ユーザーズマニュアル
Features
Programming a Feature on a
Button
Button
Your console may already have features programmed. You
can program unlabeled buttons with additional features.
1. Label the button you want to program.
2. Slide the T/P switch to the P position.
You hear a tone every 20 seconds to remind you that you are in
programming mode.
3. Press the button you labeled.
4. Dial the programming code (See Appendix B for list of
4. Dial the programming code (See Appendix B for list of
programming codes).
Some features require additional entries. For example,
you must dial an extension for inside Auto Dial.
Some features require additional entries. For example,
you must dial an extension for inside Auto Dial.
5. Slide the T/P switch to the center position.
Using a Feature Code
There are two ways to access a feature:
■
Press a button programmed with a specific feature.
You can program some features on line buttons for
one-touch use or to toggle the feature on and off. Your
one-touch use or to toggle the feature on and off. Your
console may already have features programmed. You
can program any unused line buttons with additional
features.
can program any unused line buttons with additional
features.
Programming a Feature on a Button
4-5