TERK Technologies Terk LF-IRX IR Remote Extender LF-IRX ユーザーズマニュアル

5. Move the Unit that appears not to be working to another

location and try it again.

6. Attach the Infrared Extender to the Receiver for

situations where there is an obstruction (TV Cabinet,

etc.) between the Receiver and the component

Notice: Any change or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

LF-IRX

Troubleshooting:

1. Make sure both units are plugged into a standard

electrical outlet.

2. If the LED light inside the Transmitter does not

illuminate when the Remote Control is operated:

• Make sure you are pointing at the front of the

Transmitter (the IR logo is on the front).

• Make sure you are within 18 feet of the front of the

Transmitter (depending on the range of your

individual remote control, it may be necessary to

move closer to the Transmitter).

• Make sure nothing is blocking the path between the

remote and the Transmitter.

3. If your component does not respond when a remote

control is used, but the LED on the Receiver is lit:

• Make sure the Receiver is within 20 feet of your

component equipment

• Make sure the IR logo on your Receiver is pointing at

the front of your component.

• Make sure there is a clear path between the Receiver

and your component.

4. If the LED light on the Transmitter lights when you

operate the remote, but the LED on the Receiver does

not:

• Extend the antenna all the way up or move the

antenna to a different position for better reception.

• Make sure the Transmitter is no more than 100 feet

from the Receiver.

LF-IRX