Tektronix AD007 ユーザーズマニュアル
Getting Started
AD007 User Manual
25
Setup Procedure 5 - DHCP Server and Static IP
If the following conditions are true, the network has automatically
configured the network settings of your adapter.
configured the network settings of your adapter.
H The network administrator verifies that you have a DHCP/
BOOTP server on your network.
H The network administrator has assigned you a static IP address.
H The network administrator has indicated that the DHCP/BOOTP
H The network administrator has indicated that the DHCP/BOOTP
server is configured to serve the static IP address to the Ethernet
hardware address of your adapter.
hardware address of your adapter.
H One end of the RJ-45 cable is connected to the RJ-45 connector
on the back of the AD007 adapter. Push the connector in until it
clicks.
clicks.
H The other end of the RJ-45 cable is connected to the network
drop assigned by the network technician.
H After the 30-second power on routine, the following states apply.
GPIB
LAN
LAN-Link
POWER
-- -- -- -- -- -- -- -- -- -- (30 second self-test, lights blink amber) -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- (Self test pass, indicators momentarily blink green) -- -- -- -- -- -- --
Off
Green/Amber/Off
Green
(IP address is
known)
(IP address is
known)
Green
H You are able to access the web pages of the adapter using the IP
address assigned by your network administrator.
(The procedure to access the web page interface and continue on
with the rest of the installation is on page 26.)
with the rest of the installation is on page 26.)