Tektronix Blood Glucose Meter 524A ユーザーズマニュアル
Probe Accessories
TDS 520A, 524A, 540A, & 544A User Manual
3Ć103
Dual-Lead Adapter
The dual-lead adapter makes an easy connection to 0.025 diameter connec-
tor pins (see Figure 3-54). One lead connects to a ground reference pin, and
the other to the signal pin. The adapter prevents burring and pin damage that
can result when a retractable hook tip is used on soft pins. A single-lead
adapter is also available. These adapters can also be used with the SMT
KlipChip to provide access to very small signal and ground test points.
tor pins (see Figure 3-54). One lead connects to a ground reference pin, and
the other to the signal pin. The adapter prevents burring and pin damage that
can result when a retractable hook tip is used on soft pins. A single-lead
adapter is also available. These adapters can also be used with the SMT
KlipChip to provide access to very small signal and ground test points.
Although the dual-lead adapter is an improvement over the long ground leads
in terms of added inductance, measurements at frequencies greater than
30 MHz may require using one of the low-inductance ground leads. Because
of the length of the signal lead, the dual-lead configuration is also more
susceptible to signal crosstalk than other tip configurations.
in terms of added inductance, measurements at frequencies greater than
30 MHz may require using one of the low-inductance ground leads. Because
of the length of the signal lead, the dual-lead configuration is also more
susceptible to signal crosstalk than other tip configurations.
Figure 3-54: Dual-Lead Adapter