Technika DAB121 ユーザーズマニュアル
10
SETTING THE ALARMS
SETTING THE ALARMS
You can set two completely separate alarm times (ALARM 1
and ALARM 2) and activate either or both of them to wake
you with a buzzer or radio. You can also pre-set the station
preset and volume settings that the alarms will wake you
with.
The alarms are set from within the ‘Alarm’ option of the
Settings Menu.
NOTE:- You must complete all settings before leaving the
menu or your changes won’t be saved.
Setting the Alarm:
You can set two completely separate alarm times (ALARM 1
and ALARM 2) and activate either or both of them to wake
you with a buzzer or radio. You can also pre-set the station
preset and volume settings that the alarms will wake you
with.
The alarms are set from within the ‘Alarm’ option of the
Settings Menu.
NOTE:- You must complete all settings before leaving the
menu or your changes won’t be saved.
Setting the Alarm:
Switch on the radio (Alarm settings cannot be changed
•
when set to Standby).
Press the
Press the
•
MENU button.
‘Autoscan’ will appear on the display.
Press the
•
O
button once to step to the ‘System’ menu
option.
Press the
Press the
•
VOLUME/SELECT control.
Press the
•
P
or
O
button to step to the ‘Alarm’ menu
option.
Press the
Press the
•
VOLUME/SELECT control.
‘Alarm 1 Setup’ will appear on the display.
Press the
•
VOLUME/SELECT control to begin setting
Alarm 1 or press the
P
button before selecting to
choose Alarm 2 setup.
Alarm 1 Wizard is now displayed.
The alarm is now set in the sequence shown on this page.
NOTE: Press the MENU button at any time to exit alarm
setting, leaving the settings unchanged.
The alarm is now set in the sequence shown on this page.
NOTE: Press the MENU button at any time to exit alarm
setting, leaving the settings unchanged.
To make a change to a setting:
Press
1.
the
P
or
O
button to scroll through the options
available for a setting (or times when clock setting).
When you have finished changing a setting, press the
When you have finished changing a setting, press the
2.
VOLUME/SELECT control to confirm the setting and
move on to the next setting in the sequence.
Repeat the previous two steps to change each setting as
move on to the next setting in the sequence.
Repeat the previous two steps to change each setting as
3.
required.
*NOTE:- When changing the Alarm radio preset setting,
choose the ‘Last listened’ option to wake to the last station
you played before setting the radio to Standby.
Saving alarm settings:
Your alarm settings are automatically saved when you
complete the last setting and press the VOLUME/SELECT
control.
The display will confirm with the words ‘Alarm saved’.
Waking to the alarm:
Once you have set the alarm with your required time and
wake-up mode, set the radio to Standby.
If the alarm is active, the alarm symbol will show on the
display -
choose the ‘Last listened’ option to wake to the last station
you played before setting the radio to Standby.
Saving alarm settings:
Your alarm settings are automatically saved when you
complete the last setting and press the VOLUME/SELECT
control.
The display will confirm with the words ‘Alarm saved’.
Waking to the alarm:
Once you have set the alarm with your required time and
wake-up mode, set the radio to Standby.
If the alarm is active, the alarm symbol will show on the
display -
ALARM SETTING SEQUENCE