Tascam DP-004 ユーザーズマニュアル

TASCAM DP-004

2–Quick Start Guides

Raise the

MASTER LEVEL

knob and

VOLUME

dial as

necessary to hear the mic input through the vocals.

CAUTION

Always monitor through headphones when using a

mic. If you monitor through speakers, feedback could

occur and the recorded sound might not be right.

NOTE

When the input source is one of the built-in mics, the

input cannot be heard when the REC indicator is not lit.

7 Press the

key while pressing and holding the

stop (

) key to return to the beginning of the song.

Press the playback (

) key to play the recorded

guitar tracks while you practice the vocal part.

Both guitar parts and your singing can be heard

through the headphones.

8 Use the track

LEVEL

knobs,

MASTER LEVEL

knob and

VOLUME

dial to adjust the output volume and the

balance between the tracks.

9 Return to the start of the track again and press the

playback (

) key while pressing and holding the

record (

–

) key to start recording. The

TRACK 3

REC

key stops blinking and stays lit constantly.

You are recording again. Sing!
10 When you are finished, press the stop (

) key to

stop recording.

11 Press the

TRACK 3

REC

key again. Its light turns off.

Mixing the tracks

After you finish recording, the next step is to make

a stereo mix. This unit allows you to make a stereo

mix for every song.

1 Use the

LEVEL

knobs for tracks 1, 2 and 3, to adjust

the levels of the tracks and the balance between

them. Use the

MASTER LEVEL

knob to adjust the

overall level.