Tascam DP-004 ユーザーズマニュアル

TASCAM DP-004

4–Preparations

Preparing the power and SD card

Installing an SD card

An SD card is used as recording media for recording

and playback.

Cards that comply with SD and SDHC standards

•

can be used.
Cards should be at least 512 MB in size.

•

A list of SD cards that have been tested with this

•

unit can be found on the TASCAM web site

Insert the SD card into the SD card slot inside the

battery compartment on the bottom of the unit.

1 Make sure the unit power is OFF. Open the battery

compartment and remove the batteries if they are

inside.

2 Insert the

SD Card

into the slot as shown in the

following illustration until it clicks into place.

3 Replace the batteries if you are using them and

close the cover.

Ejecting the card

Push an inserted card in further to eject it.