Tascam DP-004 ユーザーズマニュアル
54
TASCAM DP-004
6–Basic Recording
Selecting the input source
This unit has two input channels (
INPUT A
and
INPUT
B
) that can be selected separately as input sources.
The built-in microphones (front panel
MIC A
and
MIC B
) and external input signals (input through
the rear panel
INPUT A
and
INPUT B
connectors) can
be selected as input sources. Mic, line and guitar
signals can be input through the
INPUT A
channel.
The
MIC/LINE–GUITAR
switch on the left side panel
must be set accordingly. Moreover, the sensitivity
can be set when using the built-in mics.
1 When the transport is stopped and the Home
Screen is open, press the
INPUT SETTING
key to open
the
INPUT SETTING
screen.
Use the
IN A
and
IN B
items to set the input sources
for the
INPUT A
and
INPUT B
channels.
2 Use the
F3
(§) and
F4
(¶) keys to select the
IN A
or
IN B
setting, and turn the
DATA
wheel to select the
input source.
IN A
selection choices
OFF
: input OFF
INT.MIC A-Low
: built-in
MIC A
(low sensitivity)
INT.MIC A-Mid
: built-in
MIC A
(middle sensitivity)
INT.MIC A-High
: built-in
MIC A
(high sensitivity)
GUITAR/LINE
: guitar or line signal (through
INPUT A
connector)
MIC
: external mic (through
INPUT A
connector)
IN B selection choices
OFF
: input OFF
INT.MIC B-Low
: built-in
MIC B
(low sensitivity)
INT.MIC B-Mid
: built-in
MIC B
(middle sensitivity)
INT.MIC B-High
: built-in
MIC B
(high sensitivity)
LINE
: line (through
INPUT B
connector)
MIC
: external mic (through
INPUT B
connector)
3 After changing the setting, press the
HOME
key to
return to the Home Screen.
4 If a source that uses the
INPUT A
connector is