Tascam DP-004 ユーザーズマニュアル

TASCAM DP-004

6–Basic Recording

1 Press

ASSIGN

to open the

INPUT ASSIGN

screen.

As shown above, the input channel that is the

recording source for each track (1–4) is shown.

In the initial setting,

INPUT A

is assigned as the

recording source for tracks 1 and 3, and

INPUT B

assigned as the recording source for tracks 2 and 4.

2 Use the

(§) and

(¶) keys to select a track to

change its current input channel.

3 Turn the

DATA

wheel to set the input to

IN A

IN B

4 When finished making settings, press the

HOME

key to return to the Home Screen.

Making the first recording

Before following recording procedures below,

confirm that the source that you want to record is

connected, and that the input channel is assigned a

recording source for a track. Monitoring headphones

should also be connected.

1 Press the

REC

key of the track to record on. The

REC

indicator blinks red (that status is called

“record standby”). A maximum of two tracks can

be recorded simultaneously. If you press a different

REC

key when the

REC

indicators of two tracks are

already blinking, the track that was put into record

standby first will become inactive and the

REC

indicator will turn off.