Tascam DP-004 ユーザーズマニュアル

6–Basic Recording

TASCAM DP-004

processed further or combined with other recordings

NOTE

Only one stereo master can be made in a song at a time.

Setting the end point

Before you start mastering, set the mastering end

point. The time between the song’s zero point (00:

00: 00: 00) and the OUT point will be recorded as

the stereo master. Ordinarily, the end point of the

song is set as the OUT point. In this case, the time

at the OUT point is the length of the song. Use the

following procedures to set the OUT (end) point.

1 Press the

IN/OUT

key to open the

I/O SETTING

screen.

2 Play the song back, and press the

F4 (

OUT

)

key at

the position where you want the stereo master end

point. “

SET OUT!

” appears and this position is set as

the OUT point.

TIP

You can also set the OUT point when playback is

stopped by pressing the F4 (OUT) key.

3 Press the

HOME

key to return to the Home Screen.

NOTE

For how to adjust the OUT point and for other functions,