Tascam RC-601mkII ユーザーズマニュアル

Pressing this key sets the CD-601MKII to the online READY 
mode. 

To perform online playback, the remote control unit must 
first be set to the online READY mode. 

Audio signals are not output from any of the terminals 
unless the CD-601MKII is in the online READY mode.

The online READY point is as follows according to the state 
of the CD-601MKII when the READY key is pressed. 

•  When the tray is open: Start of track 1 on the disc

•  In the monitor PAUSE mode: Point when the READY key 

was pressed

•  When disc operation is stopped/in the monitor playback 

mode: Start of track 1 on the disc (when a cue point is 
not registered), or the position where monitor playback 
was last started from the monitor PAUSE mode (cue 
point)

•  During online playback (only when the failsafe setting is 

OFF): Point when the READY key was pressed

z

  Note, however, that in the memo mode (MEMO indicator 

is lit), the remote control unit enters the online READY 
mode at point A when point A is already set. (→ page 19 
“Functions Using Memo (A, B) Points”)

• When 

the 

READY key is pressed with the disc tray of the 

CD-601MKII opened, the remote control unit enters the 
online READY mode at the start of track 1 after the disc 
tray is closed. 

•  When the failsafe setting is ON, operation of search-

related keys such as TRACK and the numeric keys, 
and the MENU key is not accepted in the online READY 
mode. (→ page 25 “Failsafe Function”)

When this key is pressed in the online READY mode 
(READY key is lit), online playback is started. During online 
playback, this key lights (red). 

In a mode other than the online READY mode, online 
playback is not started even if this key is pressed. 

To cancel online playback, press the STOP key.

In the default setting, the online playback signal is output 
from all analog/digital output terminals on the CD-601MKII. 
Note, however, that the online playback signal can be set 
in menus not to be output from the UNBALANCED analog 
output terminal and SPDIF digital output terminal. (→ page 
24 “Setting the Terminals for Monitor Output”)

•  When the failsafe function is ON, operation of keys other 

than  STOP,  PLAY MODE and DISPLAY MODE is not 
accepted during online playback. (→ page 25 “Failsafe 
Function”)

When this key is pressed while disc operations are stopped, 
in the online READY mode or monitor PAUSE mode, 
monitor playback begins. (The key is lit.)

In the default setting, the monitor playback signal is output 
from all analog/digital output terminals on the CD-601MKII. 
Note, however, that the online playback signal can be set in 
menus not to be output from the BALANCED analog output 
terminal and AES/EBU digital output terminal. (→ page 24 
“Setting the Terminals for Monitor Output”)

•  W h e n  t h i s  i s  p r e s s e d  w i t h  t h e  d i s c  t r a y  o f  t h e 

CD-601MKII opened, the remote control unit enters the 
monitor playback mode at the start of track 1 after the 
disc tray is closed. 

•  When this key is pressed while disc operations are 

stopped, monitor playback begins from the start of track 1. 

•  This key blinks during a rehearsal for checking the audio 

of a memo point. (→ page 20 “Confirming the Audio of 
Memo Points (rehearsal)”)

When this key is pressed while disc operation is stopped, in 
the online READY mode or during monitor playback, the CD 
player enters the monitor PAUSE mode. In the monitor PAUSE 
mode, “PAUSE” is displayed in the character display area of the 
display window. 

•  When failsafe is set to OFF, the remote control unit 

enters the monitor PAUSE mode also when this key is 
pressed during online playback. (→ page 25 “Failsafe 
Function”)

When this key is pressed during online playback, in the 
online READY mode, during monitor playback, or in the 
monitor PAUSE mode, the disc will stop. This indicator is lit 
while disc operations are stopped. 

Note, however, that when the incremental play function 
is set to ON, and the STOP key is pressed during online 
playback and monitor playback, the remote control unit 
stands by at the start of the next tune to be played at either 
the online READY or monitor PAUSE mode according to the 
auto cue up setting. 

RC-601MKII_Eng.indd   10

3/24/2005   2:38:15 PM