Tascam RC-601mkII ユーザーズマニュアル

Settings made to each of the menu items can be saved to 
user banks. 

Five user banks (U1 to U5) are provided, and menu settings 
when the remote control unit is turned OFF are stored to the 
currently selected user bank. 

You will find it more convenient to save optimum menu 
settings to individual user banks depending on your specific 
work requirements. 

The user bank can be selected by using menu No. 22 
(“USER”). 

Selection: U1 (default setting) to U5, PRE

When the remote control unit is turned ON, the menu 
settings saved to the currently selected user bank are 
reproduced. When PRE is selected, all menu settings are 
returned to their defaults.

When a user bank is changed using the above menu item 
(“USER”) during operations, the menu settings change to 
those of the newly selected user bank. (The remote control 
unit need not be turned OFF then back ON again.)

The menu settings currently saved to a user bank can be 
cleared to return them to their defaults.  User banks can be 
batch-cleared or cleared individually.

Set menu No. 22 to “PRE” and use menu No. 21 
(“A_CLR”) to clear all user banks. (all clear)

When menu No. 21 (“A_CLR”) is selected, the message 
“SURE?” will be displayed. Press the 

Úkey (or turn the 

SEARCH dial clockwise).

All menu settings currently saved to user banks (U1 to U5) 
will be cleared and returned to their defaults.

•  An all clear also clears the disc information of memory 

banks (A to E).

1  Select the user bank to be cleared in menu No. 22.

2 Press 

the 

CLR key. 

RC-601MKII_Eng.indd   15

3/24/2005   2:38:18 PM