Tascam RC-601mkII ユーザーズマニュアル

໔ AUTO CUE key

This key functions in the same way as the AUTO CUE key 
on the CD-601MKII. Switches the auto cue function (mainly 
for searching for the actual track start cue point during a 
track search) ON/OFF. When this function is ON, “A.CUE” is 
lit in the display window. (→ page 17 “Auto Cue Function”)

 END CHECK key

Turns the end check function for checking the ending of a 
track ON/OFF. (→ page 26 “Checking the Ending of Tracks”)

When this key is pressed while disc operation is stopped, 
in the online READY mode or during monitor playback, 
the remote control unit enters the monitor PAUSE mode. 
(→ page 10 “Details of Transport Key Operations”)

Opens and closes the tray.

This key functions in the same way as the STOP key on 
the CD-601MKII. Pressing this key stops disc operations. 
This indicator is lit while disc operations are stopped. 
(→ page 10 “Details of Transport Key Operations”)

This key is used to perform an index search (skip).

This key is used to perform a track search (skip).

When this key is pressed while disc operation is stopped, 
in the online READY mode or during monitor PAUSE, the 
remote control unit enters the monitor playback mode. 
During monitor playback, this key lights (yellow). During 
a rehearsal in the memo mode, this key blinks (yellow). 
(→ page 10 “Details of Transport Key Operations”)

These keys are used for specifying track numbers, 
specifying index numbers, entering times, and entering 
numerical values when registering cue points. 

When this key is pressed while displaying cue points 
or memo points by using the CHECK key, the currently 
displayed point is cleared.

Also, numerical values are cleared two digits at a time 
when this key is pressed while entering numerical values 
using the numeric keys. 

When this key is pressed in the online READY mode 
(READY key is lit), online playback is performed. During 
online playback, this key lights (red). (→ page 10 “Details 
of Transport Key Operations”)

Úkey
This key is used to apply items or setting during menu 
operations, or add programs when setting programs.

This dial performs jog operation one frame at a time in 
the monitor PAUSE mode. This key is used to select 
items or setting values during menu operations. 

In the monitor PAUSE mode or monitor playback mode, 
this dial performs a fast-forward cue search when turned 
clockwise and performs a fast-backward cue search 
when turned counterclockwise. (→ page 12 “Searching 
for an Intermediate Point in a Tune”)

In the menu mode, turning it clockwise (towards YES) 
applies menu items and setting values, and turning is 
counterclockwise (towards NO) cancels menu items and 
setting values. 

Pressing this key sets the remote control unit to the 
online READY mode. The online READY point differs 
according to the state of the remote control unit when 
this key is pressed. In the online READY mode, this key 
lights (green). (→ page 10 “Details of Transport Key 
Operations”)

ແ PLAYER UNIT terminal

This terminal is for connecting to the CD-601MKII by the 
connector cable (provided). 

ໂ MONITOR IN terminal

This terminal enables input of unbalanced stereo signals 
from four systems. Input signals can be monitored on 
headphones connected to the top panel on the remote 
control unit. (→ page 25 “Headphone Monitor Function”)

RC-601MKII_Eng.indd   6

3/24/2005   2:38:13 PM