Tascam DR-44WL ユーザーズマニュアル

This is the screen that is usually shown when the unit 

is stopped.

Home Screen in the 4 CH mode

Home Screen in the MTR mode

1

Blank

Playback speed not changed
1.1× – 2.0×
0.5× – 0.9×
Playback speed cannot be changed

2

Blank

Key control function off
Key control function on
Key control function on 

(setting disabled)

3

Blank

Reverb off
Reverb on 

(Recording with the effector on)
Reverb on 

(SEND status)

4

 displayed: Speaker output on
 not displayed: Speaker output off

5

Blank: No phantom power supply

 : 48 V phantom power supplied

 : 24 V phantom power supplied

6

When power is supplied from the batteries, the 

battery icon shows the amount of remaining 

battery power in bars (

, 

, 

).

When the icon displays no bar, 

 blinks, and 

the power subsequently turns off (standby 

state) due to dead batteries.
When the dedicated AC adapter (GPE053B) 

supplied with the product or USB bus power is 

used, 

 is shown.

7

These icons show the recorder operation status.

Indicator Meaning
8

Stopped

9

Paused

7

Playing back

,

Fast-forwarding

m

Fast-rewinding

/

Skipping to the head of the next 

file

.

Skipping to the head of the 

current file or of the preceding file

8

During loop playback, the 

 icon is 

displayed.

9

When the 4CH mode is selected, the name or 

tag information of the file being played back is 

shown.
When there are multiple files in the 4CH mode, 

only the format portion of the file names and 

the basic number of the recording files are 

displayed. 
When the MTR mode is selected, the name of 

an opened song is shown.

0

Shows the IN (starting) and OUT (ending) 

points-setting state of loop playback.
When the IN (starting) point is set, the   icon is 

displayed at the corresponding position on the 

playback position-displaying bar.
When the OUT (ending) point is set, the   icon 

is displayed at the corresponding position on 

the playback position-displaying bar.

q

The current playback position is shown by a bar.

w

This is a level meter guide for adjusting the 

input and output levels.
It is displayed at the “-12 dB” position on the 

scale.

e

Shows the level of sound being input or played 

back.

r

The file state is displayed in different ways, 

depending on the type of file to be played 

back.

 : Stereo file
 : Mono file ×2
 : No file is present.

t

Shows the elapsed time (hours : minutes : 

seconds) of the current file.

y

Shows the remaining time (hours : minutes : 

seconds) of the current file.

u

Shows in decibels the maximum value of the 

playback level in a certain period of time.

1.  Remove the battery compartment cover on the 

bottom panel.

2.  Install four AA size batteries with their ¥ 

and ^ marks as shown in the battery 

compartment.

3.  Attach the battery compartment cover.

Set the type of batteries to use in the 

BATTERY TYPE

 item of the 

POWER/

DISPLAY

 menu in order for the unit to 

accurately show the amount of remaining power 

and allow the unit to accurately determine 

whether enough power is available for its proper 

operation. (By default, the type is set to 

ALKAL

 

for alkaline batteries.)

When the unit is turned off (standby state), slide 

the HOLD/ 

 switch in the 

 direction and, 

when 

TASCAM DR-44WL

 (start-up screen) is 

displayed, release the switch.
The Home Screen appears when the unit starts up.

When the unit is started up for the first time (or after 

being left without batteries), the 

DATE/TIME

 

screen appears before the start-up screen to allow 

the date and time to be set.

Use the the .// button and the wheel to 

enter the date and time, and press the ENTER/

MARK button to set them.