Tascam D01086320A ユーザーズマニュアル
TASCAM CD-200i
15
3 − Preparation for Use
DIGITAL
IN
DIGITAL
IN
ANALOG
IN
VIDEO
IN
S-VIDEO
IN
Mixer,
Recorder,
Amplifier, or
other device
Digital mixer,
digital recorder,
digital amplifier, or
other device
Video equipment such as
TV or monitor
3 − Preparation for Use
Before connecting other devices, read their operation
manuals and connect them properly. Connect the power last.
manuals and connect them properly. Connect the power last.
Connecting audio and video devices
Connecting analog audio devices
ª
Connect the analog output jacks of this unit to the input
jacks of a stereo amplifier, mixer, recorder or other device
with analog inputs.
jacks of a stereo amplifier, mixer, recorder or other device
with analog inputs.
Cables are not included with this unit.
•
Do not bundle RCA cables with power cords or
•
speaker cables. Doing so could cause reduced audio
quality or noise.
quality or noise.
Connecting digital audio devices
ª
Connect a digital output jack (coaxial or optical) of this unit
to the input jack of a stereo amplifier, mixer, recorder or
other device with a digital input.
to the input jack of a stereo amplifier, mixer, recorder or
other device with a digital input.
The iPod playback sound signal and signals input
through the AUX IN jacks can only be output as analog
signals. They cannot be output as digital signals.
through the AUX IN jacks can only be output as analog
signals. They cannot be output as digital signals.
CAUTION
This unit’s digital output during MP3 and WAV file
•
playback has a sampling frequency of 44.1 kHz.
During playback of MP3 and WAV files on audio CDs,
•
digital output is possible when the pitch control
function is in use, but the sampling frequency is
changed by an amount equivalent to the pitch
control value. When the pitch control function is
on, some devices might not be able to accept signals
from the digital outputs of this unit.
function is in use, but the sampling frequency is
changed by an amount equivalent to the pitch
control value. When the pitch control function is
on, some devices might not be able to accept signals
from the digital outputs of this unit.
Connecting video devices
ª
Connect the
VIDEO
or
S-VIDEO
output jack of this unit to
the video input jack of a television or other video device.
Please change the iPod’s TV signal setting (NTSC or PAL)
and TV Screen (or Widescreen) setting to suit the connected
device.
and TV Screen (or Widescreen) setting to suit the connected
device.