Tascam D01086320A ユーザーズマニュアル

TASCAM CD-200i

4 − Playing Back CDs

If you press the STOP key when the empty program

•

step where it is possible to add a track appears, all
steps in the program are cleared.

If you try to add more than 99 tracks, a “PGM FULL”

•

error message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.

1 Press the

PROGRAM EDIT

key on the remote control

while playback is stopped to put the unit into pro-
gram setting mode.

The track number and playback time of the track set as
program step 01 is shown on the screen (playback time
is not displayed if the loaded disc is a data CD) and
MEMORY blinks.

Program step

Playback time

Track number

2 Press the

PROGRAM EDIT

key to show the track

information of the next program step.

3 If you press the

PROGRAM EDIT

key when the final

program step is shown, it becomes possible to add
another program step. (No track number is dis-
played and the

MEMORY indicator blinks.)

4 Press the

PROGRAM EDIT

key again to exit the pro-

gram setting mode.

Replacing a program track

You can replace a track that has already been added to the
program.

1 Press the

PROGRAM EDIT

key on the remote control

while playback is stopped to put the unit into pro-
gram mode.

2 Follow the steps in “Checking the program” above

and press the

PROGRAM EDIT

key to show the pro-

gram step with the track that you want to replace.

3 Use the numeric keys or skip (Ô/Â, ¯/)

keys to select the desired track and press the

PROGRAM EDIT

key.

After replacing a track, the display shows the empty
step at the end of the program and you can add
another track to the end of the program if desired.

4. Press the

PROGRAM EDIT

key again to exit pro-

gram setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.

1. Press the

PROGRAM EDIT

key on the remote control

while playback is stopped to put the unit into pro-
gram setting mode.

2 Press the

PROGRAM EDIT

key until the empty

program step where it is possible to add a track
appears. (No track number is displayed and the
MEMORY indicator blinks.)

3 Use the numeric keys or skip (Ô/Â, ¯/)

keys to select a track and press the

PROGRAM EDIT

key.

4 In this state, you can repeat step 3 to add more

tracks, or you can press the

PROGRAM EDIT

key to

exit program setting mode.

CAUTION

Although tracks can be added to the end of a

•

program and tracks can be replaced with different
tracks, tracks cannot be inserted into the middle of a
program.

If you want to insert a track into the middle of the

•

program, replace and add program tracks to alter
the program contents.

Clearing the program

You can clear the entire program that has been set.

1 Press the

PROGRAM EDIT

key on the remote control

while playback is stopped to put this unit into pro-
gram setting mode.

2 Press the

PROGRAM EDIT

key until the empty pro-

gram step appears. (No track number is displayed
and

MEMORY blinks.)

3 Press the

STOP

key. “

-CLEAR-

” appears on the

display. After the program is cleared, program set-
ting mode resumes without any tracks added to the
program.

In addition to the above procedure, opening the disc
tray also clears the program.