Tascam TM-ST2 プリント

Description
TASCAM’s TM-ST2 is a stereo microphone designed for 
studio and live recording. Th

  is X/Y microphone cap-

tures a wide stereo image with rich sound quality. Th

 e 

unbalanced output is perfect for connecting to TASCAM 
portable recorders like the DR1 and GT-R1. A low cut 
fi lter is available to remove low frequency rumble during 
recording. Th

  e TM-ST2 includes a 10’ cable as well as an 

18” cable for shorter runs or video camera connection. 
Also included are a microphone stand clip, wind screen, 
AA battery and protective carry pouch. 

Simple to operate, the TM-ST2 is a surprisingly aff ord-
able solution to recording great-sounding stereo tracks. 

Specifi cations
Model: 

 

  TM-ST2

Elements:  

 

Back Electret Condenser

Type: 

 

  X/Y 

Stereo

Frequency Response:   30 Hz - 20kHz
Sensitivity @ 1Pa:  

-47 dBV

Impedance:  

 

200Ω, UNBALANCED 

Maximum SPL:   

126 dB SPL

Dynamic Range:  

102 dB

Power: 

 

  AA 

Battery

Consumption:    

2 mA

Connector:  

 

Integral 3-pin XLR-M

Weight:  

 

320g/11.3 oz.

Installing the battery
1.  

Unscrew microphone body cover

2.  

Remove the body shell to expose the battery  

 holder
3.  

Insert the battery, taking note of the polarity  

 markings

Battery Precautions: 
•  

Insert the battery correctly

• 

Do not charge the included AA battery

• 

Remove the battery if the microphone will not  

 

be used for a long period of time

• 

If the battery leaks, clean the battery holder  

 

before inserting a new battery

Power Switch
To operate the microphone, move the power switch 
to the ON position. An alkaline AA battery provides 
approximately 400 hours of operation under normal 
circumstances. 

Using the Low Cut Filter
Th

  e low-cut fi lter switch is located on the inside of the 

microphone. Th

  e switch is off  (fl at) by default. To switch 

on the low cut fi lter:

1.  

Unscrew microphone body cover.

2.  

Slide the body shell down as far as it will go. 

3. 

On the bottom of the microphone, near the out 

 

put jack, you will fi nd the small low cut switch. 

4.  

Move the switch to the left  to engage the rolloff   

 

(indicated by the       icon). Move the switch  

 

to the right for full bass response (indicated by  

 

the      icon).  

 
Th

  e low cut fi lter attenuates frequencies below 150Hz at 

a cutoff  slope of 6dB per octave. 

Included Accessories: 
• 

10’ Stereo (XLR-F to Stereo 3.5mm M) cable 

• 

18” Stereo (XLR-F to Stereo 3.5mm M) cable 

•  

Microphone Stand Clip 

• AA 

Battery

• Windscreen 
• Protective 

Pouch