Tascam MD-02 ユーザーズマニュアル

h

  ANALOG 

IN L/R (UNBALANCED)

These analog line input jacks (RCA pin jacks) have a 
nominal input level of –10 dBV. 

j

  ANALOG OUT L/R (UNBALANCED)

These analog line output jacks (RCA pin jacks) have a 
nominal output level of –10 dBV. 

These output the selected input signal during recording, 
when in recording standby and when monitoring. 

k

  DIGITAL 

IN (COAXIAL)

This coaxial digital input jack conforms to IEC60958-3  
(S/PDIF). 

Since this deck has a sampling rate converter, in 
addition to 44.1 KHz signals, 32 and 48 KHz digital 
signals can also be input. 

l

  DIGITAL OUT (COAXIAL)

This coaxial digital output jack conforms to 
IEC60958-3 (S/PDIF). 

This outputs the selected input signal during recording, 
when in recording standby and when monitoring. When 
a digital input is selected, that digital input is output 
unchanged.

;

  DIGITAL IN (OPTICAL)

This optical digital input jack conforms to IEC60958-3 
(S/PDIF). Since this deck has a sampling rate converter, 
in addition to 44.1 kHz signals, 32 and 48 kHz digital 
signals can also be input.

z

  DIGITAL OUT (OPTICAL)

This optical digital output jack conforms to 
IEC60958-3 (S/PDIF). 

This outputs the selected input signal during recording, 
when in recording standby and when monitoring. When 
a digital input is selected, that digital input is output 
unchanged.

x

  ANALOG INPUT (BALANCED) (MD-02B only)

These analog input jacks (balanced XLR) have a 
nominal input level of +4 dBu. 

(1: GND, 2: HOT, 3: COLD)

c

 

ANALOG OUTPUT (BALANCED) (MD-02B only)

These analog output jacks (balanced XLR) have a 
nominal output level of +4 dBu. 

(1: GND, 2: HOT, 3: COLD)

These output the selected input signal during recording, 
when in recording standby and when monitoring. 

v

 

~ IN connector

Connect the included power cord.