Tascam MD-02 ユーザーズマニュアル

TASCAM MD-02/MD-02B

Examples:

Track 9: Press

Track 12: Press

followed by

Track 103: Press 1 followed by

and then

After selecting a track by number keys, press the

PLAY

key on the remote control to start playing the

selected track. You can also press the

READY

key on

the remote control to start playback standby at the
beginning of the selected track.

Searching

During playback (or in playback standby), you can search
in a track for a part that you want to hear.

Press and hold the search (

Ô/

) keys on the

main unit or the

Ô/

keys on the

remote control.

Repeat playback

Press the

REPEAT

key on the main unit or the remote

control to set the repeat mode.

Repeat OFF: REPEAT not shown

Repeat ALL: REPEAT appears

Repeat 1: REPEAT appears and SINGLE appears

Press the

REPEAT

key during playback or playback

standby to cycle through the modes in this order:
OFF, Repeat ALL and Repeat 1.

OFF

Repeat ALL

Repeat 1

Press the

REPEAT

key when stopped to switch

between OFF and Repeat ALL modes.

OFF

Repeat ALL

By using this function at the same time as the program
or random functions, program repeat and random
repeat are also possible.

NOTE

If the unit is in single repeat mode when the STOP

•

key is pressed, the mode changes to all repeat.
If the unit is in single repeat mode when the power is

•

turned OFF, the mode changes to all repeat when the
power is turned ON again.

Using power on play

By using a commercially available timer, for example, to
turn this deck’s power on, it can be made to begin playback
at desired times.

1. Connect the deck in advance so that it receives power

from an external timer’s power output.

2. Insert an MD for playback.

3. Set the

POWER ON PLAY

switch on the main unit’s

front panel to

. This causes the timer icon to light

on the display.

NOTE

If the POWER ON PLAY switch is set to PLAY but no MD is
loaded, the icon on the display blinks.

4. Set the timer to the desired time.

At the desired time this unit’s power is turned ON and
playback starts automatically.

NOTE

Since the contents of the program are not retained when
the power is turned OFF, if the playback mode was set to
“Program,” the playback mode automatically changes
to “Continue” when the power is turned ON again and
playback starts.

Play selected tracks in desired order

(program playback)

You can create and play a program of selected tracks in a
desired order.

Up to 32 tracks can be included in the program.

1. When stopped, press the

PLAY MODE

key on the

main unit or the

P.MODE

(play mode) key on the

remote control until “Program” appears on the
display.
The number of tracks in the program and the program
total time appear in the character display area.

2. Use the

MULTI JOG

dial on the main unit or the

number keys on the remote control to select the track
number that you want to add to the program, and
then press the

MULTI JOG

dial on the main unit or

the

ENTER

key on the remote control to add it to the

program.

3. Repeat step 2 to program additional tracks.

As tracks are added to the program, the number of
tracks in the program and the program total time shown
increase.

4. After finishing setting the program, press the

PLAY

key to start playing tracks in the program order.

5 − Playback