TANDBERG DIRECTOR D5016402 ユーザーズマニュアル
General Use
TANDBERG Director Videoconferencing System
41
Web-interface
It is possible to access and maintain the system remotely via a local area network (LAN) using a
standard Web-browser.
standard Web-browser.
Connect your system from the LAN socket, found on the codec interface panel, to a local area
network. Then configure your codec:
network. Then configure your codec:
•
Press
MENU
, select ‘Terminal Settings’ > ‘LAN Settings’
•
Specify IP-assignment ‘DHCP’ or ‘Static’. If DHCP is selected no other settings are needed.
If Static is selected, ‘IP-address’, ‘IP-subnet mask’ and ‘Gateway’ must be specified.
If Static is selected, ‘IP-address’, ‘IP-subnet mask’ and ‘Gateway’ must be specified.
E
XAMPLE
:
IP-
ASSIGNMENT
:
S
TATIC
IP-
ADDRESS
:
196.9.200.129
IP-
SUBNET
MASK
:
255.255.255.0
G
ATEWAY
:
196.9.200.21
See ‘A
DVANCED
U
SE
’ > ‘LAN S
ETTINGS
’ for further information.
•
Start your Web-browser. In the address field type the IP-address of the codec. The Web-page
of the codec will be shown.
of the codec will be shown.
Text Chat / Closed Captioning
While in an ISDN or IP call to another system supporting Text Chat (T.140), select ‘Text Chat’ from
the Web-page of the codec. Enter text in the window displayed. When selecting ‘Send Text’, the
text will be displayed on the local and far-end monitor as shown below:
the Web-page of the codec. Enter text in the window displayed. When selecting ‘Send Text’, the
text will be displayed on the local and far-end monitor as shown below:
The local Text Chat window can be closed
manually from the Web-interface by pressing
‘Close Window’. It will also close
automatically after a few minutes without
activity.
manually from the Web-interface by pressing
‘Close Window’. It will also close
automatically after a few minutes without
activity.
Streaming
To view streaming, select ‘Streaming’ from the Web-
page of the codec. See separate ‘Streaming’ section
in this manual for further information.
page of the codec. See separate ‘Streaming’ section
in this manual for further information.
PC SoftPresenter
PC SoftPresenter is used to display PC images on your system without using a VGA cable (PC
Presenter). The TANDBERG video conferencing system and your PC must be connected to a LAN. In
addition, VNC (Virtual Network Computing) server software must be installed on the PC.
Presenter). The TANDBERG video conferencing system and your PC must be connected to a LAN. In
addition, VNC (Virtual Network Computing) server software must be installed on the PC.
To show the PC image:
N O T E
‘PC: VNC’
MUST
BE
SET
IN
‘V
IDEO
S
ETTINGS
’.
•
Start the VNC software on your PC.
•
Press PC on your remote control. Use UP/DOWN to
activate PAGE UP/PAGE DOWN on the PC.
activate PAGE UP/PAGE DOWN on the PC.
For setup information and details, see ‘VNC S
ETTINGS
’ in ‘A
DVANCED
USE
’.
N O T E
T
HE
SYSTEM
MUST
BE
RESTARTED
BEFORE
CHANGES
IN
THE
‘LAN S
ETTINGS
’
MENU
CAN
TAKE
EFFECT
. N
OTICE
THE
ON
-
SCREEN
RESTART
QUICK
KEY
OPTION
.
N O T E
S
TREAMING
CAN
ONLY
BE
INITIATED
ONLY
IF
IS
‘
ON
’.