Oracom PROFI MX160 ユーザーズマニュアル
5. Dimensional Diagram and Labeling Modems
Dimensional Diagram
mobile mounting
4×M4
DIN 35 rail mounting
2×M4 not for P
RF power 25 W (type P) 4×M4 onli
Fig. 5.1: Mounting dimensions of the radiomodem
The modem can be fasten by four screws M4 (for mobile application especially) or by the mounting rail
DIN35 (stable applications). The flexile clamps mounted in the central holes are used for fastening on
the DIN35 rail.
DIN35 (stable applications). The flexile clamps mounted in the central holes are used for fastening on
the DIN35 rail.
For the high-performance P model the modem is mounted on the back wall to ensure sufficient cooling
of the modem. In this case 4x M4 screws are used for mounting purposes. There are no centre holes
in the P version for attachment to a DIN rail.
of the modem. In this case 4x M4 screws are used for mounting purposes. There are no centre holes
in the P version for attachment to a DIN rail.
Labelling Radio Modems
is described in next table:
Wideband modems – PROFI MX160 – © RACOM s.r.o.
24
Dimensional Diagram and Labeling Modems