OPPO Digital DV-987HD ユーザーズマニュアル

 

26 

ADVANCED OPERATIONS 

TV System Selection 

 

While you will want to set the video output system (NTSC/PAL) to the same as that 
supported by your TV, realize that the DVD player will convert, on-the-fly any 
content that is not in the format your TV understands.  The default output is NTSC 
for North America.  

Press the P/N button on the remote control to cycle the video output to PAL, NTSC 
or AUTO system.  The TV screen displays the selected system name. 

Some points to keep in mind: 

•  When the video output is set to PAL or NTSC system, the DVD player 

will convert the disc content to the selected system if it is different. 

•  When the video output is set to AUTO, the DVD player will not perform 

system conversion.  The AUTO mode is only to be used if your TV 
supports both NTSC and PAL systems. 

•  Playback must be stopped before switching the system from one 

setting to another. 

 

NOTE 
•  Some TV sets only support one of the NTSC or PAL systems.  If the wrong output is 

selected, the TV may not display a picture.  In this case repeatedly press the P/N button 
until a supported system is selected. 

•  The output system selection chosen with the P/N  button will be reset when the DVD 

player is turned off.  To permanently set the output system, please use the “TV Type” 
setup menu item in the “Preference” setup menu page. (Refer to page 45 for details.) 

 

Fast Playback 

 

 

 

 

 
 

 

 

You may fast forward or reverse to search for a certain point during playback. 

1. Press 

the 

 button on the remote control and the player starts fast 

forward playback.  Each press of the FWD button switches the playback 
speed in the following sequence: 

 

 

 

2. Press 

the 

 button on the remote control and the player starts fast 

reverse playback.  Each press of the REV button switches the playback 
speed in the following sequence: