Omnia Industries Turntable 6FM ユーザーズマニュアル

Applicable to Release software version 6.1.x. 
 
Page 31 – Schedule 
 

Please add: 

 

In order for presets to change during a schedule, the Preset checkbox in the New 
or Modify schedule dialog box must be selected. 
Leave it unselected when you will be using the trigger script function and click on 
the Scripts button instead to edit the trigger scripts. 

 
Page 78 - To set up a connection: 
 

Replace paragraph 2 with the following: 

 

2. In the password box, enter the login password for the Omnia-6 that you wish to 
make a connection to. The factory default password for serial port and modem 
connections (only) is “tomtom” (all lower case). For Ethernet remote connections, 
the passwords are the same as the Omnia-6’s front panel passwords. The factory 
default for level 3 (full access) is “engineer” (all lower case). 

 
Page 83 – Using an Ethernet Network Based Connection 
 

In paragraph 2, the port number given for Omnia-6 Remote’s Telnet session is 
incorrect. Omnia-6 Remote uses the standard Telet port 23 and not port 1254 as 
printed. 
 
Paragraph 4 is incorrect. Please replace it with the following: 
 
The default passwords for Ethernet remote connections are the same as the front 
panel passwords: 
Level 1: “user” (all lower case) 
Level 2: “advuser” (all lower case) 
Level 3: “engineer” (all lower case) 
These passwords can only be changed at the front panel of the Omnia-6.