Omnia Industries Food Processor Omnia One Multicast Stero Audio Processor with SENSUS ユーザーズマニュアル
The Main Menu should appear:
Click on the “Remote” link
option from the top menu or
“Meters & Remote Control”
option from the Main Menu.
You may see the Java logo and then the main Remote Control screen should appear. If audio is present on the
OmniaONE’s inputs, you should see the meters moving along with the audio. A small amount of flickering is
normal as the meter information is updated but if it is excessive or the meters are not moving smoothly, check your
network connection and/or update your video card drivers or settings.
There are 5 “tabs” in the Multicast style Remote Control applet: Preset, Processing, In, Out and IO.
Click on the “Remote” link
option from the top menu or
“Meters & Remote Control”
option from the Main Menu.
You may see the Java logo and then the main Remote Control screen should appear. If audio is present on the
OmniaONE’s inputs, you should see the meters moving along with the audio. A small amount of flickering is
normal as the meter information is updated but if it is excessive or the meters are not moving smoothly, check your
network connection and/or update your video card drivers or settings.
There are 5 “tabs” in the Multicast style Remote Control applet: Preset, Processing, In, Out and IO.
Preset
To enter the Preset menu,
click on the “Preset” tab
and the Preset dialog will
appear:
From the Preset menu,
you can select, save and
delete presets stored in
the OmniaONE unit.
These are the same
operations that can be
performed from the
OmniaONE’s front
panel, but consolidated
on a single menu.
To select a preset and put it “on the air”, double-click on it in the preset list or highlight it and click the “Select”
button.
Note: In the current software, when selecting presets from the remote, the Preset: name will not be refreshed on the
OmniaONE’s front panel. To refresh the front panel preset name, simply click the OmniaONE’s jog wheel to enter
one of the menus and then click “<-Exit”. (Or enter the Preset menu, rotate the Jog Wheel to the right and select
“Cancel*”
To save changes to the currently running user preset (as shown in the gray status bar at the bottom of the remote
window), click the “Save Current” button. It does not matter what preset is highlighted in the preset list. The
currently running preset will be updated with your changes.
To save the current settings as a new preset, click the “Save Current As” button. A new applet window will open
with a dialog box where you can type the name of the new preset. For convenience, there is also a dropdown menu
where you can select an existing preset name to start with. Once the new preset name appears as desired, click the
“Save” button. The new preset will be saved to the unit and will appear in the preset list. To cancel without saving,
simply close the applet window.
OmniaONE Multicast - Use and Operation Manual – Version 0.90
64