ONKYO DR-L50 ユーザーズマニュアル

26

26

• Make sure that all the connections from pages 18 to 25 are

complete (the connection to the TV is required).

• Turning on the DVD Receiver may cause a momentary power

surge, which might interfere with other electrical equipment such
as computers. If this happens, use a wall outlet on a different
circuit.

ON

THEATER DIMENSIONAL

PROGRESSIVE SCAN

IPM

ON indicator

STANDBY indicator

■ Setting the Clock Display

To display the clock while in Standby mode, hold down the
STANDBY/ON button for at least 2 seconds when switching from
On to Standby mode.

Displaying the clock in Standby mode consumes the same amount of
power as in the On mode.

Unit

to wall outlet

The DVD Receiver enters the standby
mode and the STANDBY indicator lights
up.

The light and display on the DVD
Receiver’s front panel light. At the same
time, the STANDBY indicator goes off and
the ON indicator lights up.

• To put the DVD Receiver in the standby

mode, press STANDBY/ON on the DVD
Receiver, or STANDBY on the remote
controller. Be sure to set the volume to
minimum before putting the DVD
Receiver in the standby mode for the
next use to avoid sudden loud sound
reproduction.

• While in the STANDBY mode, the DVD

Receiver can receive signals from the
remote controller.

• Setting the STANDBY button on the

remote controller to standby does not
shut off the power completely.

Remote
Controller