ONKYO Blu-ray Player BD-SP808 ユーザーズマニュアル

FUNCTION SETUP

Set up the network connection settings in order to use BD-
Live, DLNA home media server or network update
function.

After you enable a network connection or change the
network settings, always perform the connection test to
check if the connection is correctly made.

In stop mode, press [SETUP].

Use [K / L] to select ,

then press [ENTER].

Use [K / L] to select “Others”, then press [ENTER].

Use [K / L] to select “Network Connection”, then
press [ENTER].

Use [K / L] to select “Connection Test”, then press
[ENTER].

Connection test will start automatically and the test result
will appear right after the connection test finishes.

Press [ENTER] to go to the list of network status
confirmation screen.

Press [ENTER] to go back to the previous screen, or
press [SETUP] to exit.

Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without
making any changes to the default settings.)

If you want to set the network settings back to the default
settings as above (except “BD-Live Setting”), follow the
procedure below.

Follow steps 1 to 4 in “Connection Test” on page 51.

Use [K / L] to select “Enable(Easy)”, then press
[ENTER].
• The unit will start the connection test automatically

and the test result will appear right after the test
finishes.

• After the connection test finishes, press [ENTER] to go

to network status confirmation screen.

Press [ENTER] to activate the network settings and
set the network connection automatically. Press
[SETUP] to exit.

In following cases, select “Enable(Custom)” to set each
setting as necessary.

• IP Address Setting / DNS Setting

Follow steps 1 to 4 in “Connection Test” on page 51.

Use [K / L] to select “Enable(Custom)”, then press
[ENTER].

Use [K / L] to select “IP Address Setting”, then press
[ENTER] repeatedly to select the desired setting.