Omega RS-232 ユーザーズマニュアル
Installation
OMG-USB-232-1
Page 2
Installation
Operating System Installation
Choose Install Software at the beginning of the CD and select the Serial I/O
software drivers and install SeaCOM.
software drivers and install SeaCOM.
System Installation
The screen captures below are taken from a Windows ME installation. Your
particular operating system may differ slightly from what is shown based on your
version of Windows.
particular operating system may differ slightly from what is shown based on your
version of Windows.
The OMG-USB-232-1 can be connected to any Upstream Type “A” port either
at the PC host or an Upstream Hub. The OMG-USB-232-1 is hot-pluggable,
meaning there is no need to power down your computer prior to installation. The
OMG-USB-232-1 requires no user hardware configuration since there are no
jumpers present on the card.
1.
at the PC host or an Upstream Hub. The OMG-USB-232-1 is hot-pluggable,
meaning there is no need to power down your computer prior to installation. The
OMG-USB-232-1 requires no user hardware configuration since there are no
jumpers present on the card.
1.
Connect OMG-USB-232-1 to an Upstream Host or Hub.
This indicates that the system has recognized the new device and will now
proceed to locate a driver.
proceed to locate a driver.