OmniWare Pro 12 ScanSoft ユーザーズマニュアル

14

All files needed for scanner setup and support are copied automatically 
during the program’s installation. Before using OmniPage Pro 12 for 
scanning, your scanner should be installed with its own scanner driver 
software and tested for correct functionality. Scanner driver software is 
not included with OmniPage Pro.

Scanner installation and setup are done through the Scanner Wizard. You 
can start this yourself, as described below. Otherwise, the Scanner Wizard 
appears when you first attempt to perform scanning.

Please follow these steps to use the Scanner Wizard to setup your scanner 
with OmniPage Pro 12:

X

Choose Start

ProgramsScanSoft OmniPage Pro 12.0 

Scanner Wizard

or click the Setup button in the Scanner panel of the Options 
dialog box.

or choose a scan setting in the Get Page drop-down list in the 
OmniPage Toolbox and click the Get Page button.

The Scanner Setup Wizard starts. The first panel appears only on 
first setup when called from inside OmniPage Pro.

X

Choose ‘Select scanner or digital camera’, then click Next. You 

see a list of all detected TWAIN scanner drivers, with the system 
default scanner selected.

X

Click once to select the driver of the scanner you want to use. 

Click ‘Other drivers...’ if you need to browse for a driver. Select 
‘Configure Advanced Settings’ for an extra panel if you want your 
scanner’s own interface to be hidden during scanning or to 
modify the image transfer method. Click on Next.

X

Choose Yes to test your scanner configuration, then click Next. 

The wizard will now test the connection from the computer to 
your scanner. When completed, click on Next.

X

Insert a test page into your scanner. The wizard is now prepared 

to do a basic scan using your scanner manufacturer’s software. 
Click on Next. Your scanner’s native user-interface will appear.