Oceanic ATOM 2.0 ユーザーズマニュアル

156

CARE AND CLEANING

Protect your ATOM from shock, excessive temperatures,

exposure to chemicals, and tampering. Protect the lens against

scratches with a Instrument Lens Protector. Small scratches will

naturally disappear underwater.

Soak and rinse the ATOM in fresh water at the end of

each day of diving, and check to ensure that the areas

around the Low Pressure (Depth) Sensor (Fig. 143a), PC

Interface Data Port (Fig. 143b), and Buttons are free of

debris or obstructions. Soak and rinse the Regulator(s)

with the Transmitter(s) attached.

To dissolve salt crystals, use lukewarm water or a slightly

acidic bath (50% white vinegar/50% fresh water). After

removal from the bath, place the ATOM and the

Regulator(s) with Transmitter(s) unit under gently running

water and towel dry before storing.

Transport your ATOM system cool, dry, and protected.

INSPECTIONS AND SERVICE

Your ATOM should be inspected annually by an Authorized

Oceanic Dealer who will perform a factory prescribed function

check and inspection for damage or wear. To keep the 2 year

limited warranty in effect, this inspection must be completed

one year after purchase (+/- 30 days).

Fig. 143 - ATOM CASE BACK