Oceanic ATOM 2.0 ユーザーズマニュアル

SET END PRESSURE ALARM information includes (Fig. 54):

> Graphic END

> Set Point numeric value, flashing.

> Symbol PSI (or M)

Pressing and releasing the S button momentarily (< 2

seconds) will increase the Set Point from 300 to 1500 PSI

(20 to 105 BAR) in 100 PSI (5 BAR) increments.

Depressing and holding the S button will scroll through the

Set Points at a rate of 4 Set Points per second until it is

released.

Pressing and releasing the A button momentarily (< 2

seconds) will save the setting and/or advance to the SET

PO2 ALARM screen with the Set Point flashing.

Pressing and releasing the A button momentarily and

repeatedly (< 2 seconds each time) will step through the

other SET A screens.

Depressing the A and S buttons simultaneously for 2

seconds will save the setting and revert back to the SET A

screen.

Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will

revert to the NORM or GAUG SURF MAIN screen.

Fig. 54 - SET END PRESSURE

The END Pressure

Alarm will activate

when Pressure in the

Tank being used at

the time (TMT 1, 2 ,

or 3) decreases to the

Alarm Set Point.