Oceanic ATOM 2.0 ユーザーズマニュアル

NOTE: When the Conservative Factor is set ON,

the No Deco Limit times are reduced to values

equivalent to those that would be available at

the next higher 3000 foot (915 meter) Altitude.

Refer to the tables on Pages 166/167.

SET BACKLIGHT DURATION information includes (Fig. 61):

> Graphic GLO.

> Symbol TIME.

> Set Point, flashing.

Pressing and releasing the S button momentarily (< 2

seconds each time) will step through the Set Points of 0, 5,

and 10 (:XX seconds).

Pressing and releasing the A button momentarily (< 2

seconds) will save the setting and/or advance to the SET

SAMPLING RATE screen with the Set Point flashing.

Pressing and releasing the A button momentarily and

repeatedly (< 2 seconds each time) will step through the

SET U screens.

Depressing the A and S buttons simultaneously for 2

seconds will save the setting and revert back to the SET U

screen.

Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will

revert to the NORM or GAUG SURF MAIN screen.

Fig. 61 - SET BACKLIGHT

DURATION

The Backlight will

not remain On for

the additional

Duration time set if

the L button is held

depressed longer

than 10 seconds.