Oceanic Personal Dive Computer Veo 100Nx ユーザーズマニュアル

TO SET - TIME

Set for factory local time, the Time can be set to values between 0:00 and 12:59 (AM/

PM) or 0:00 and 23:59.

  After having set and accepted Hour Format, the Set Time screen appears with the Hour

Set Point flashing (Fig. 23).

- - or - -

  While the Surface Sequence is scrolling, press the button for 10 seconds to bypass Set

FO2, Wet Activation, Units, and Hour Format.  Release the button when the Set Time

screen appears with the Hour Set Point flashing.

  Press/release the button repeatedly (less than 2 seconds each time) to advance the

Hour Set Point in increments of 1 Hour per press of the button.

  Depress the button for 2 seconds to accept the Hour Set

Point, the Minutes Set Point flashes.

  Press/release the button repeatedly (less than 2 seconds

each time) to advance the Minute Set Point in increments of 1

Minute per press of the button.

  Depress the button for 2 seconds to accept the Minute Set

Point and advance to Set PO2 Alarm.

Fig. 23 - SET TIME