Oceanic Personal Dive Computer Veo 100Nx ユーザーズマニュアル

Inspection

Activate the unit and watch carefully as it performs a full

diagnostic and battery check, and enters Surface Mode.

Observe the LCD display to ensure it is consistently clear and

sharp in contrast throughout the screen.

WARNING: If there are any portions of the display

missing or appearing dim, or if a Low Battery condi-

tion is indicated, return your Veo 100Nx to an Autho-

rized Oceanic Dealer for a complete evaluation before

attempting to use it.

RETURNING THE MODULE TO BOOT

If the Boot was fitted with a Spacer and it was previously

removed, replace the Spacer into the Boot.

Orient the Module over the opening in the Boot, and dip the

bottom edge into it while pressing the top edge with the palm

of your hand. Stop pressing when the bottom edge of the

Module has just entered the Boot.

Correct the alignment of the Module as needed so that it is

straight.

Press the Module completely into place with your thumbs,

watching the alignment, until it snaps into place.

Responsible