Q-Logic Computer Drive 8200 SERIES ユーザーズマニュアル

3 – SANbox SSP Management GUI Reference

 

Navigating the SANbox SSP Management GUI

3-8

SN0054628-00  A

Q

In addition, the following settings can be changed on the System screen:

For all the Force Fabric, Initiator, Target, and Speed settings, you must 
click Apply before the settings are saved. The Initiator, Target, and Max 
Frame Size settings take effect only after rebooting the SANbox SSP. 

Force Fabric: selecting this box forces this port to operate in Fabric Mode Only (no 
loop support).

Initiator: selecting this box enables initiator (storage back-end) operations through 
this port.

Target: selecting this box enables target (front-end) operations through this port.

Speed: changing this box enables you to force the speed operation of the SANbox 
SSP port.

Enabling and Disabling ports takes effect immediately after clicking the 
Enable/Disable buttons. 

Disable: click Disable to disable a port.

Enable: click Enable to enable a port.