Q-Logic Computer Drive 8200 SERIES ユーザーズマニュアル

B – Command Reference

Commands

SN0054628-00  A

B-9

Q

SANbox SSP includes three Ethernet connections, MGMT, HA1, and HA2. This 
command disables the specified Ethernet connection so that it cannot send or 
receive network traffic.

This command is used for tightened security purposes. Once you disable the 
Ethernet connections using this command, you can access the CLI and administer 
SANbox SSP only from the serial console.

disable eth [ethernet name]
Name of the Ethernet that you are disabling: MGMT, HA1, or HA2.

If you are connected through the management port, disabling the MGMT Ethernet 
terminates any active network GUI and CLI sessions, requiring relogin. If you are 
using the CLI on the serial console, the connection is not be disrupted.

Disables the specified Fibre Channel port number so that it cannot send and 
receive Fibre Channel traffic. 

[port number]
[*]

disable port [port number]
Port number is an integer 1-8 for SANbox 8200-08 SSP/SANbox 8202-08 SSP or 
1-16 for SANbox 8202-16 SSP to indicate the Fibre Channel port. 

disable port [*]
* indicates all Fibre Channel ports.