Novell ZENworks Endpoint Security Management 3.5 ユーザーズマニュアル
ZENworks® ESM 3.5
Administrator’s Manual
35
Step 2: Adjust the trigger threshold by first, selecting condition from the drop down list. This
states whether the trigger number is:
•
Equal to (=)
•
Greater than (<)
•
Greater than or equal to (<=)
•
Less than (>)
•
Less than or equal to (>=)
Step 3: Adjust the trigger number. This number is variant, depending upon the type of alert.
Step 4: Select the number of days that this number must be met.
Step 5: Select the trigger type, whether it’s the warning icon (
) or the emergency icon (
).
Step 6: Ensure Enable this alert is checked.
Step 7: Click Save to save the alert.
Managing Alerts
Alerts notify you of issues that need to be remediated within the endpoint security environment.
Remediation is normally handled on a case-by-case and individual or group basis. To help
identify the issue, Alert reports are displayed when the alert is selected (see Figure 14).
Remediation is normally handled on a case-by-case and individual or group basis. To help
identify the issue, Alert reports are displayed when the alert is selected (see Figure 14).
Figure 14 : Alert Reporting
This report displays the current trigger results, displaying information by affected user or device.
The data provided here provides the necessary information to take remediation actions to correct
The data provided here provides the necessary information to take remediation actions to correct