New Transducers 250C ユーザーズマニュアル

B

ASIC

 O

PERATION

 > 

U

SING

 

THE

 M

AIN

 M

ENU

• 

Fish—sets an alarm/icon to sound/display when the unit 

detects a fish of the specified symbol size.

• 

Shallow Water/Deep Water—sets alarms to sound for when 

you enter areas of specified depth that are too shallow or too 

deep.

• 

Drift—sets an alarm to sound when you’ve exceeded a 

specified drift depth range. For example, if the value is set to 

5 ft. and the current depth is 20 ft., the alarm will sound if the 

unit detects a depth greater than 25 ft. or shallower than 15 ft.

• 

Water Temperature—sets an alarm to sound when the 

transducer reports a temperature above, below, inside, or 

outside the specified values.

• 

Battery—sets an alarm to sound when the battery nears a 

critical state of discharge.

• 

Timer—allows you to set, stop, or reset a timer. With the 

Count Dn (Down) and Count Up settings you may specify 

the duration of the timer count.

1.  Use the 

ARROW keys to highlight the desired subtab of the 

Alarms tab.

2.  Highlight the field below the alarm name you wish to activate 

and press 

ENTER.

3.  Change the mode to the desired setting and press 

ENTER.

4.  Highlight the next field to the right and press 

ENTER, then 

enter the desired settings and press 

ENTER to finish.

5.  If you want the alarm to display and beep until 

acknowledged, highlight the 

Persist box and press ENTER 

to place a check mark in the box.